How To Keep Your Engineered Wood In Tip Top Condition
Keeping your engineered wood floor clean is an essential aspect of maintaining its beauty and durability. When properly cared for, engineered wood flooring will last for decades. In this blog post, we'll discuss the best practices for cleaning your engineered wood floor to ensure that it stays in top condition for years to come. From daily maintenance to deep cleaning, we've got you covered.
1. Dust And Sweep Daily
The first step in caring for your engineered wood floor is to make sure it stays dust-free on a daily basis. Use a soft-bristled broom or a vacuum with a soft brush attachment to remove any dirt, dust, or debris from the surface. This will prevent scratches and damage caused by particles that can get trapped under furniture or foot traffic. Additionally, by removing frequent dust and debris, you'll avoid the need for more intense cleaning in the future.
2. Use A Damp Mop For Deeper Cleaning
For tougher stains and spills, use a slightly damp mop to clean the floors thoroughly. Make sure to wring out excess water as too much moisture can damage the wood. You can also use a specialised cleaner such as those available through our store which are especially formulated to clean your floor without leaving it too wet.
3. Avoid Harsh Chemicals And Abrasives
When cleaning your engineered wood floors, avoid using harsh chemicals or abrasive cleaners as these can strip off the protective layer and cause discolouration or damage to the wood. Stick to mild, pH-neutral cleaners specifically designed for hardwood floors. There are also specialist cleaners depending on whether your floor has been finished with a natural oil or lacquer, so you will want to do your research beforehand.
4. Protect From Direct Sunlight
Engineered wood floors are susceptible to fading and discolouration when exposed to direct sunlight for prolonged periods. To prevent this, use curtains or blinds to block out UV rays during peak sunlight hours or consider installing window films during the summer months.
5. Use Rugs And Mats
Protect your engineered wood floors from scratches and dents by placing area rugs or mats in high-traffic areas, such as entryways, hallways, and living rooms. This will help trap dirt and debris from shoes and prevent them from damaging the floor.
6. Wipe Up Spills Immediately
Spills are inevitable, but they can cause significant damage to your engineered wood floor if not cleaned up promptly. In case of spills or accidents, make sure to wipe them up immediately to prevent any moisture from seeping into the wood and causing damage. Use a soft cloth or paper towel to soak up the spill, and then clean the area with a damp cloth.
7. Avoid Dragging Furniture
When moving furniture, make sure to lift it instead of dragging it across the floor. This will prevent scratches and dents on your engineered wood floors. You should also use furniture pads or felt protectors under the legs of your furniture to reduce the risk of damage.
8. Schedule Professional Maintenance
Just like any other flooring material, engineered wood floors require regular maintenance and upkeep to keep them looking their best. Consider scheduling a professional deep cleaning or resealing every few years to maintain the quality and appearance of your floors. Contrary to some common flooring myths, engineered wood floors can be sanded down and retreated by applying a new protective finish. This will bring the floor back to its former splendour once it starts to look tired.
Taking proper care of your engineered wood floors will not only ensure their longevity but also maintain their aesthetic appeal. So, make sure to incorporate these practices into your cleaning routine and enjoy the beauty of your engineered wood floors for a long time. Happy cleaning!